Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Wilton Manors
Furnace repair in Wilton Manors typically runs $150 – $700, and most jobs are done the same day we diagnose them. Homes here, especially the 1950s and 1960s CBS construction off NE 26th Street and around Westside Park, have furnaces tucked into closets, attics, and rooftop platforms with inches of clearance. That tight access changes how repairs work, and it’s exactly why you want a tech who knows Wilton Manors housing. Call (754) 354-6972 for a written, upfront quote before any work begins.
Why Dalton Heating & Air Fort Lauderdale Is Wilton Manors’s Preferred Furnace Repair Company
Wilton Manors is a dense, walkable city where homes sit close together and furnaces live in cramped spots. Closet installs, attic platforms, rooftop units with zero side clearance – our techs see these every week, not once a season. When a 71-year-old ranch on a quiet street needs a blower motor pulled from a hallway closet with two inches of clearance, we plan for it before we arrive. That local familiarity means fewer trips back to the truck and faster repairs.
Marco Benitez, who runs our Fort Lauderdale-based team, holds every tech to The Garrison Standard: written price before work starts, a written guarantee on every repair, and a free return visit if the repair fails within the guarantee period. No handshake promises. No “it’ll probably be fine.” The terms are in writing. Our techs are background-checked and uniformed, and they service Carrier, Trane, Lennox, and American Standard furnaces daily. When you schedule with us, a live person answers the phone – 24/7, not a voicemail queue.
We are measured against The Garrison Code on every job: arrive inside the stated window, put the price in writing before starting, do the work by the book, leave the site clean, stand behind the repair for a full year. That applies to a $22 capacitor or a $700 heat exchanger repair. Same standard either way.
Styles & brands we work with
Gas Furnace Repair in Wilton Manors
Gas furnace repair in Wilton Manors almost always comes down to three things: access, corrosion, and airflow. Because so many furnaces here are in closets or attics, a repair that takes 45 minutes in a suburban garage can take three hours when our tech is working through a rooftop hatch or a 24-inch closet door. The first thing we check is whether the furnace gets enough combustion air. Closet installs in Wilton Manors homes often have no dedicated combustion air intake, so the furnace starves for oxygen and trips the rollout switch. That’s a safety feature doing its job, but it leaves you cold on the few nights you need heat.
Salt air from the Atlantic, less than two miles east, is the other constant. Heat exchanger seams and inducer motor housings corrode faster here than inland homes, even in a furnace that only runs December through February. Our techs pressure-test and visually inspect the heat exchanger on every repair call. If corrosion has eaten pinholes through the steel, we tell you plainly: repair it if the unit is sound, replace it if the cabinet is rusted through. Gas furnace repair in Wilton Manors runs $150 – $700 depending on the part. A flame sensor or ignitor sits at the low end. A gas valve or inducer motor at the high end. You get the exact price in writing before we turn a wrench.
Tight-Access Furnace Diagnostics
We do not diagnose over the phone. A tech opens the cabinet, checks gas pressure, flame signal in microamps, and static pressure in the ductwork. On older Wilton Manors systems, collapsed 1960s thin-wall duct can be the root cause of intermittent overheating, not the furnace itself. If we fix the ducts, the furnace stops cycling on the high-limit switch, and we do not charge you for a part you didn’t need.
Heat Exchanger Repair and Inspection
Heat exchanger repair in Wilton Manors starts with a visual inspection for rust, pinholes, and hairline cracks. Salt air corrosion is the culprit more often than age or overuse. If the exchanger can be replaced and the cabinet is sound, we quote it. If the cabinet is rusted, we tell you before quoting a repair we would not put our name on.
Furnace Tune Up in Wilton Manors
Furnace tune up in Wilton Manors costs $80 – $200 and should be done before the first cool front of the season, usually November. A tune-up is not a quick filter swap. We clean the flame sensor, check the inducer motor amp draw, verify gas pressure, inspect the heat exchanger for corrosion, and measure the temperature rise across the furnace. We also check the rollout switch and combustion air intake, which matters in a city where most furnaces are in closets with limited fresh-air access.
Homes near the Intracoastal, especially older ones east of Andrews Avenue, deal with salt in the air year-round. That salt settles on burners and motor windings even when the heat is off. A tune-up catches a corroding inducer housing before it seizes on the first cold night. Every tune-up includes a written report of what we found, what we fixed, and what can wait. Technicians are not paid on what they sell, so the report is diagnostic, not a sales pitch.
Pre-Season Furnace Inspection
A pre-season inspection is the cheapest insurance against a midnight failure. We check startup sequence, flame quality, exhaust venting, and return-air temperature. On Wilton Manors closet installs, we test whether the unit is drawing enough combustion air. If it’s marginal, we can install a louvered door or fresh-air intake before the rollout switch starts tripping.
Duct Leakage and Airflow Testing
Old ducts are the hidden problem in half the furnace failures we see in Wilton Manors. Thin-wall aluminum duct from the 1960s sweats in low-pitch attics, then collapses. The furnace overheats, cycles on the limit switch, and you think the furnace is dying when the ducts are actually strangling it. We test static pressure on every tune-up. If the numbers are off, we tell you exactly where the restriction is and what a repair costs.
Trusted Brands We Service in Wilton Manors
We service Carrier, Trane, Lennox, and American Standard furnaces in Wilton Manors, and we keep common ignition and safety parts on our trucks. That matters when you schedule a repair on a chilly January morning and a flame sensor or ignitor is the culprit. We do not need to order the part and come back next week. Whether it’s a Trane with a failing gas valve or an American Standard with a weak inducer, our techs are factory-trained on all nine major residential brands, and the price is in writing before work starts.
Common Furnace Repair Problems We See in Wilton Manors Homes
- Rollout switches tripping on closet installs. Older Wilton Manors homes often have furnaces in closets with no combustion air intake. The unit starves for oxygen, the rollout switch trips, and the furnace shuts down intermittently.
- Rusted-out heat exchangers from salt air. The Atlantic is two miles away from most of Wilton Manors, and that salt air eats through steel heat exchanger seams faster than inland homes. Owners often don’t notice until a carbon monoxide alarm goes off.
- Collapsed 1960s thin-wall aluminum ductwork. Low-pitch attics and original duct systems mean airflow problems masquerading as furnace failures. The furnace runs hot, cycles on the limit switch, and shortens its own life.
- Inducer motor failures from corrosion. Salt settles on motor windings year-round, even when the heat is off. The first cold night, the inducer seizes, and the furnace won’t fire. We see this most often in the older neighborhoods east of Andrews Avenue.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Wilton Manors, FL
Here’s what furnace repair costs in Wilton Manors, in writing:
| Service | Typical Price Range |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Tune Up | $80 – $200 |
The range exists because parts and labor vary by what’s actually wrong. A dirty flame sensor or failed ignitor sits at the low end. A gas valve, inducer motor, or heat exchanger repair sits at the high end. This is the same pricing across our service area – we quote the same number in Fort Lauderdale, Pompano Beach, Plantation, and Lauderhill that we quote in Wilton Manors. No city markup. We give you the price in writing before any work starts, and repairs are guaranteed in writing for a full year. If the repair fails within that year, we return at no charge. For a furnace tune up in Wilton Manors, you’ll pay a flat $80 – $200 and receive a written report of what we found. Estimates are free. Call (754) 354-6972 for an exact quote.
We Also Serve Cities Near Wilton Manors
Our Furnace Repair team covers Wilton Manors and the surrounding communities, including Fort Lauderdale, Pompano Beach, Plantation, and Lauderhill. If you’re in any of these cities and need furnace work, the same written pricing and year-long guarantee apply. We’re part of the Wilton Manors service area for Dalton Heating & Air Fort Lauderdale, and we schedule calls across the region seven days a week.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Wilton Manors
Your furnace is almost certainly starved for combustion air. Most closet-installed furnaces in Wilton Manors’s 1950s and 1960s homes have no dedicated fresh-air intake, so the unit pulls oxygen from the same small room it’s sitting in. When the air gets thin, the rollout switch trips to prevent a dangerous flame rollout. This is a safety feature working properly. The fix may be as simple as adding a louvered door or a proper combustion air intake, not replacing the furnace. Call (754) 354-6972 and we’ll diagnose it in one visit.
It depends on the condition of the cabinet. If the cabinet is sound and the exchanger failed from normal corrosion, we can often replace the heat exchanger – though on a 1960s Carrier in a tight Wilton Manors closet, that may cost at the high end of the $150 – $700 repair range. If salt air has rusted the cabinet itself, or parts are no longer available, replacement is the honest answer. We’ll show you exactly what we found and put both options in writing before you decide.
Yes, and it’s one of the most common things we explain to Wilton Manors homeowners. Salt in the air doesn’t care whether the furnace is running. It settles on heat exchanger seams, inducer motors, and burner assemblies year-round, then moisture from humidity accelerates the corrosion. A furnace that sits idle from March to November may rust through before it has 500 hours of runtime on it. This is why we inspect the heat exchanger on every call and recommend a pre-season tune-up to catch corrosion before the first cold snap.
Sweating ducts mean the insulation has failed and moisture is condensing on the metal. That leads to musty smells, collapsed ducts, and airflow problems that make your furnace overheat. In Wilton Manors’s low-pitch attics, thin-wall 1960s aluminum duct is especially prone to this. Sometimes a section can be replaced; sometimes the whole system has failed. We measure static pressure and inspect the ductwork before recommending anything. We’ll give you a number for either path.
Yes, and it’s a conversation we have often, especially for homeowners with furnaces rusting out from salt air and limited attic space for new ductwork. A heat pump replaces your aging furnace and AC with one system, and Wilton Manors’s mild winters make heat pumps an efficient fit. The trade-off is tighter installation space in older homes. We’ll evaluate your electrical panel, ductwork condition, and clearance before recommending anything. For an exact heat pump installation quote, call (754) 354-6972.
Call Dalton Heating & Air Fort Lauderdale for Furnace Repair in Wilton Manors
When your furnace goes out in Wilton Manors, call (754) 354-6972. You’ll get a live person on the phone, a written price before any work starts, and a repair that’s guaranteed in writing for a full year. If it fails within that year, we return at no charge. That’s the standard, and it applies to every job, from a $22 capacitor to a full heat exchanger replacement. We serve all of Wilton Manors, including the older neighborhoods east of Andrews Avenue and the homes off NE 26th Street. Schedule your free estimate today.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Lauderdale, serving Wilton Manors and the surrounding South Florida communities since 2003.