Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Fort Lauderdale, FL
Furnace repair in Fort Lauderdale typically costs $150 – $450 for most parts and labor, with same-day or next-day service available from Dalton Heating & Air. We answer the phone 24/7, put every price in writing before work begins, and back each repair with a written one-year guarantee. If your furnace is acting up, call (754) 354-6972 and you’ll talk to a live person, not a voicemail queue.
Most people don’t think much about their furnace until a cold snap rolls through South Florida, which is exactly when they need it most. Fort Lauderdale homes run furnaces hard during those brief winter stretches, and a system that sits idle ten months a year develops its own set of problems: corroded igniters, dust-caked burners, blower motors that seize from disuse. Dalton Heating & Air Fort Lauderdale is a Garrison Partners company, operating under The Garrison Standard since 2003. That means the technician who shows up arrives inside the stated window, wears a uniform, and hands you a written price before touching a single component. We service all nine major residential HVAC brands, including York, Daikin, and Bryant.
If you’re looking for a broader picture of what we do with heating systems, see our Heating & Furnace in Fort Lauderdale page.
Key Takeaways
- Most furnace repairs in Fort Lauderdale run $150 – $450, with heat exchangers and blower motors at the higher end.
- Every repair includes a written price before work starts and a written one-year guarantee.
- We service York, Daikin, Bryant, American Standard, and five other major brands.
- Phone support is staffed by a live person 24 hours a day, 7 days a week.
- If a repair fails within the guarantee period, we return at no charge.
When You Need Furnace Repair
Furnaces fail in predictable ways, and most of them announce themselves before they quit entirely. Here’s what we hear from homeowners across Fort Lauderdale, from Rio Vista to Imperial Point to Coral Ridge:
- The furnace blows cold air. This usually points to a failed igniter or a tripped limit switch. In homes near the Intracoastal, salt air accelerates corrosion on electrical connections, which makes this more common than you’d expect.
- The system short cycles. It kicks on, runs two or three minutes, shuts off, then repeats. A clogged filter or a failing flame sensor often causes this. Short cycling drives up your FPL bill fast.
- You smell something burning the first time it runs each season. Dust settles on the heat exchanger during the months the furnace sits idle. That first burn-off smell is usually normal, but a persistent or sharp smell, especially anything that smells like gas, needs a technician immediately.
- The furnace won’t start at all. No power, no fan, no response at the thermostat. Could be a control board failure, which is the most common major repair we see in Fort Lauderdale’s older neighborhoods like Victoria Park and Sailboat Bend.
- Rattling, banging, or whining noises. A loose blower wheel, a failing motor bearing, or a cracked heat exchanger all make distinct sounds. Ignoring the noise turns a $200 repair into a $900 replacement.
- The furnace runs but doesn’t heat the house evenly. Rooms on the far side of the house run 5 – 10 degrees cooler. That’s often a duct issue or a blower motor that isn’t spinning at full speed.
One thing specific to Fort Lauderdale: our furnaces do more sitting than running, and sitting is hard on equipment. Humidity gets into the cabinet, rust forms on the burner assembly, and small critters sometimes nest in the flue during the off-season. If your furnace hasn’t been inspected in a few years, the first cold night is a bad time to find out something’s wrong.
Our Furnace Repair Process
Here’s exactly what happens when you call Dalton Heating & Air Fort Lauderdale:
- You call (754) 354-6972 and talk to a live person. No phone tree, no “leave a message and we’ll call you back.” We take your information, ask what the furnace is doing, and schedule a window that works for you.
- A background-checked, uniformed technician arrives inside the stated window. You’ll know who’s coming before they pull up. Our techs carry ID and drive marked vehicles.
- The technician diagnoses the problem and hands you a written price before any work begins. This is non-negotiable under The Garrison Code. The number on that sheet is the number you pay. No add-ons, no “while I’m here” upsells.
- You approve the repair, and we do the job by the book. We replace parts with manufacturer-spec components and test the system before we call it done. We service York, Daikin, Bryant, and American Standard furnaces, among others.
- We leave your home clean and hand you a written guarantee. Every repair is covered for a full year. If it fails in that time, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s included on every job, not sold as an add-on.
- If the repair doesn’t hold, the second visit is free. No argument, no fine print. The Garrison Standard means we stand behind the work for 12 full months.
Most furnace repairs in Fort Lauderdale take between one and three hours on site, depending on the part and the age of the system.
Furnace Repair Pricing in Fort Lauderdale
Here’s what you can expect to pay for common furnace repairs in this area, based on what we’ve seen across Broward County:
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Diagnostic service call | $75 – $120 | Waived if you approve the repair |
| Flame sensor cleaning or replacement | $120 – $220 | Most common fix, done in under an hour |
| Igniter replacement | $150 – $300 | Typically a York or Goodman part on local systems |
| Limit switch or pressure switch | $130 – $250 | Often mistaken for a bigger problem |
| Blower motor replacement | $350 – $700 | Higher for variable-speed motors |
| Control board replacement | $300 – $550 | Common on systems 12+ years old |
| Heat exchanger replacement | $800 – $1,800 | Sometimes replacement of the furnace makes more sense |
What moves the price is the part, not the labor. A Daikin igniter costs more than a universal one, and a variable-speed blower motor costs more than a single-speed. We quote the exact price in writing before we turn a screwdriver, so there’s no guessing when you see the number.
If the heat exchanger is cracked or the furnace is 15 years old or more, we’ll tell you straight whether a repair or a full replacement is the smarter money. In some Fort Lauderdale neighborhoods, particularly older homes in Croissant Park and Poinsettia Heights, we see furnaces from the early 2000s that are reaching the end of their service life. We don’t push replacement when a $200 part fixes the problem, and we don’t patch a unit that’s going to fail again in three months.
Call (754) 354-6972 for a free estimate. The diagnostic fee is waived when you approve the repair.
FAQs – Furnace Repair
How much does furnace repair cost in Fort Lauderdale?
Most furnace repairs in Fort Lauderdale run between $150 and $450 for common parts like igniters, flame sensors, and pressure switches. More involved work, like a blower motor or control board replacement, ranges from $300 to $700. Dalton Heating & Air Fort Lauderdale gives you a written price before any work begins, so you know the exact number up front. Call (754) 354-6972 for a free estimate on your specific system.
Can you fix my furnace the same day?
In most cases, yes. We keep common parts stocked on our trucks, including igniters, flame sensors, limit switches, and capacitors for major brands like Bryant, York, and American Standard. If your part needs to be ordered, we’ll set the expectation clearly and schedule a return visit that works for you.
Is it cheaper to repair or replace a furnace?
If the repair costs less than 50% of the price of a new furnace and your unit is under 12 years old, repair usually makes sense. If your furnace is over 15 years old and needs a heat exchanger, which can run $800 to $1,800, replacement is often the better financial decision. We’ll give you an honest recommendation either way, with the numbers in writing. Call (754) 354-6972 and we’ll assess your system at no charge for the estimate.
What brands of furnaces do you repair?
We service all nine major residential HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Our technicians are factory-trained on each of these systems, so the repair gets done correctly the first time.
Do you really guarantee furnace repairs for a year?
Yes. Every repair from Dalton Heating & Air Fort Lauderdale includes the 365-Day Done Right Promise in writing. If the repair fails within 12 months, we return at no charge. No fine print, no pro-rated coverage, no upgrade required to get the guarantee.
Why Fort Lauderdale Homeowners Call Dalton Heating & Air
We’re part of Garrison Partners, which has operated under The Garrison Standard since 2003. That standard is specific, not a slogan: arrive inside the window we set, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. Marco Benitez leads the Fort Lauderdale team, and every technician who shows up at your door is background-checked and uniformed.
If you’ve been burned by a no-show tech, a quote that changed at the door, or a repair that failed three weeks later, you’ll see the difference in the first phone call. We answer live, 24/7. We show up when we say we will. And we put everything in writing.
Call (754) 354-6972 today for a free furnace repair estimate in Fort Lauderdale. A live person will answer, day or night.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Lauderdale, serving Fort Lauderdale.