Furnace Repair in Lighthouse Point - Fixed Today, No Surprise Invoice

Fast, Reliable Furnace Repair Across Lighthouse Point

Furnace repair in Lighthouse Point typically runs $150 – $700 depending on the failed part, and most calls are diagnosed same-day. If your heat won’t fire after a storm or a cool snap, call (754) 354-6972 and we’ll get a technician to your Lighthouse Point home fast. We know this city’s housing stock, its salt air, and the specific ways both chew through furnaces and heat pumps. Marco Benitez, who leads Dalton Heating & Air Fort Lauderdale, holds every job to The Garrison Standard: written pricing before work starts, arrival inside the stated window, and a year-long written guarantee on the repair.

Why Dalton Heating & Air Fort Lauderdale Is Lighthouse Point’s Preferred Furnace Repair Company

Lighthouse Point homeowners don’t need another contractor who shows up late, quotes one price, then hands over a different invoice at the door. We run on a different set of rules under The Garrison Code. The price for your Furnace Repair is in writing before a single panel comes off. The technician is background-checked and arrives in uniform, so you know exactly who’s walking up the driveway. And if the repair fails within a full year, we return at no charge under the 365-Day Done Right Promise.

We answer the phone with a live person twenty-four hours a day, seven days a week. No voicemail queue when your furnace is dead on a Sunday night in January. Dispatch runs from our South FL office, and crews serve Lighthouse Point directly, so response times are realistic, not aspirational. We’ve worked on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard systems throughout Lighthouse Point. That means the parts truck usually has what your furnace needs the first trip.

Heating Repair in Lighthouse Point

Heating Repair in Lighthouse Point usually means tracing why a furnace or heat pump won’t produce warm air, then fixing the specific component that failed: a control board, an ignitor, a blower motor, a gas valve, or a heat exchanger. Most Lighthouse Point heating repairs land between $150 and $700, with the high end covering heat exchanger or major control work. On this page, we’re talking about forced-air furnaces and heat pumps, the dominant heating systems in Lighthouse Point’s single-family homes built from the 1960s through the 1980s.

What heating repair involves here

A Lighthouse Point heating repair call starts with a system diagnostic: we check the thermostat signal, line voltage, control board fault codes, and gas pressure before replacing anything. Salt-laden air from the Intracoastal accelerates corrosion on electrical connections and condenser coils, so we inspect those even when the complaint is purely “no heat.” After the repair, we test the full heating cycle, not just the part we replaced.

When to call for heating repair

If the furnace fires but blows cold air, makes a burning smell, short-cycles, or won’t respond to the thermostat, call (754) 354-6972 the same day. In Lighthouse Point, a furnace that won’t fire after a storm is often a control board or capacitor damaged by a power surge, not a bad heat exchanger. We’ll tell you the exact problem and give you the repair price in writing before we turn a wrench.

Boiler Repair in Lighthouse Point

Boiler Repair in Lighthouse Point is less common than furnace work because most homes here use forced-air systems, but a handful of older and waterfront properties still run hydronic boilers for heat. Boiler repair in Lighthouse Point also runs $150 – $700 for most component failures: circulator pump replacement, expansion tank issues, zone valve failures, and gas valve repairs. The salt air that corrodes condenser coils also attacks boiler piping and electrical controls on homes near the canals.

Common boiler failures on waterfront lots

Homes along the Intracoastal and the canals deal with accelerated rust on cast-iron boiler sections and corrosion on wiring harnesses. A boiler that fires and shuts down quickly is often a blocked circulator or a failed thermocouple. We test combustion and verify the flue draft before calling the job done, because carbon monoxide risk is a real concern with any gas-fired boiler.

Price honesty on boiler work

The $150 – $700 range covers the typical repairs we make on Lighthouse Point boilers. If the heat exchanger itself is cracked and the boiler is fifteen-plus years old, we’ll tell you straight that replacement may make more sense than patching a corroded unit on borrowed time. Either way, the written price is in your hand before any work starts. That’s not a courtesy; it’s The Garrison Standard.

Trusted Brands We Service in Lighthouse Point

Our technicians are factory-trained on York, Daikin, Bryant, and American Standard systems, among the nine major residential HVAC brands we service. For Lighthouse Point customers, that means the repair is done to the manufacturer’s spec, not guessed. We keep common York and Bryant components on the truck and can source Daikin and American Standard parts fast from our South FL supply chain, so you’re not waiting a week for a control board while the house cools down.

Common Furnace Repair Problems We See in Lighthouse Point Homes

• Salt-corrosion on condenser coils and electrical connections. Homes near the Intracoastal and the canals accumulate salt fast, and that corrosion causes refrigerant leaks and weak connections even before a heating issue shows up.
• Power surge damage to control boards and blower motors. Tropical systems and lightning flickers in Lighthouse Point fry boards and capacitors, so a furnace won’t respond to the thermostat even when the gas valve is fine.
• Flooded condensers shorted after restart. Lighthouse Point’s high water table and storm flooding can soak an outdoor unit; switching it back on without drying the electrical compartment shorts the compressor.
• Undersized ductwork on 1960s – 1980s homes. Many original Lighthouse Point duct systems were sized for old 10-SEER equipment, so a modern furnace can’t move enough air and overheats or short-cycles.

Pricing for Furnace Repair in Lighthouse Point, FL

We Also Serve Cities Near Lighthouse Point

Dalton Heating & Air Fort Lauderdale handles furnace repair in Lighthouse Point and the surrounding area, including Furnace Repair in Lighthouse Point, Fort Lauderdale, Pompano Beach, Plantation, and Lauderhill. If you’re a few minutes outside the Lighthouse Point line, we’re still your local option.

FAQs About Furnace Repair in Lighthouse Point

The Storm and Salt Reset Protocol for Lighthouse Point Furnaces

Here’s the local reality that most furnace repair pages won’t tell you. In Lighthouse Point, the biggest HVAC emergency calls come in September after summer-long salt accumulation causes condenser coil leaks on waterfront properties. So furnace repair here often means diagnosing a corroded heat exchanger or electrical controls before you ever see a heating issue. The high water table and proximity to the Intracoastal and ocean mean even newer systems face accelerated corrosion on outdoor condenser coils and electrical components, especially along the city’s many canals.

This page gives you the exact storm-surge and salt-corrosion reset protocol for Lighthouse Point furnaces, so you don’t turn a flooded condenser into a fried compressor. Here’s how the sequence works. After any flooding or prolonged rain, shut the breaker at the panel. Do not test the thermostat. Do not “wait and see.” Water inside the condenser’s electrical compartment takes time to dry, and a wet start is how compressors die. We open the unit, dry the compartment, test the capacitors and contactor, and only then restore power. If the system still won’t fire, the likely culprits are a surge-damaged control board, a corroded condenser coil leaking refrigerant, or a failed blower motor. We test all three rather than guessing.

Last fall we got called to a 1970s ranch on Lighthouse Drive where a York furnace wouldn’t fire after a storm. Our tech found a weak capacitor and a corroded condenser coil from salt-laden air, not a faulty heat exchanger. We replaced the capacitor, cleaned the coil, and verified the refrigerant charge before restarting the system. The furnace fired on the first try, and the homeowner got another full season out of the York instead of a premature replacement bill. That level of diagnosis is what we do on every Lighthouse Point call.

Marco Benitez holds every job to the 365-Day Done Right Promise. If the repair doesn’t hold for a full year, we come back at no charge. That’s the guarantee, in writing, on every service call we make in Lighthouse Point.

Written by Marco Benitez, Owner at Dalton Heating & Air Fort Lauderdale, serving Lighthouse Point since 2003.

Call Dalton Heating & Air Fort Lauderdale for Furnace Repair in Lighthouse Point

If your furnace won’t fire, short-cycles, or won’t respond to the thermostat after a storm, call (754) 354-6972 now. A live person answers twenty-four hours a day, seven days a week. We’ll schedule a Lighthouse Point appointment inside a stated window, put your repair price in writing before any work starts, and stand behind the repair for a full year. Estimates are free. The number is (754) 354-6972.